Map Sensor: Removal: 1.6L
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - MAP Sensor |
| 2 - PCV valve |
| 3 - Ignition Coil |
- Remove the air cleaner cover.
- Disconnect the negative battery cable.
- Disconnect the electrical connector from the MAP sensor.
- Remove the screws from the MAP sensor.
- Remove the MAP sensor.