Crankshaft Position Sensor: Removal: 1.6L

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crankshaft Sensor Location

Courtesy of DAIMLERCHRYSLER CORP.

Disconnect the negative battery cable
Raise vehicle and support.
Disconnect the electrical connector.

Fig 2: Crankshaft Position Sensor
Courtesy of DAIMLERCHRYSLER CORP.
Remove bolt from crankshaft position sensor.
Remove sensor.