Crankshaft Position Sensor: Installation: 1.6L

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crankshaft Position Sensor

Courtesy of DAIMLERCHRYSLER CORP.

Install the Crankshaft sensor.
Install bolt and tighten to 10 N.m (90 in. lbs.).

Fig 2: Crankshaft Sensor Location
Courtesy of DAIMLERCHRYSLER CORP.
Connect the electrical connector.
Lower vehicle.
Connect the negative battery cable.