Solenoids And Vacuum Harness: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Solenoid Mounting Bracket

GC0019375

Courtesy of DAIMLERCHRYSLER CORP.

1 - NUTS

Remove nuts (1) securing solenoid mounting bracket to shock tower.
Disconnect solenoid electrical connector.
Disconnect vacuum harness connector from solenoid.

Fig 2: Solenoid Lock Tab
Courtesy of DAIMLERCHRYSLER CORP.

1 - LOCK TAB
Push on solenoid lock tab (1) and slide solenoid off bracket.