LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Exhaust System & Turbocharger) >> Solenoids And Vacuum Harness >> Installation

Solenoids And Vacuum Harness: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide solenoid onto mounting bracket until lock tab engages.
  2. Connect vacuum harness connector to solenoid.
  3. Connect solenoid electrical connector.
  4. Install nuts securing solenoid mounting bracket to shock tower.
scientia non olet · About LEMON Manuals