Section 83 (Exhaust System & Turbocharger): Shields-Heat: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Position heat shield(s) to underbody.
- Install heat shield fasteners.
- Inspect heat shield to exhaust system clearances and adjust as necessary. For clearance specifications (Refer to EXHAUST SYSTEM - SPECIFICATIONS) .
- Lower vehicle.
- Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
- Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.