Section 83 (Exhaust System & Turbocharger): Converter-Catalytic: Description
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - FLEX JOINT |
| 2 - CATALYTIC CONVERTER |
| 3 - OXYGEN SENSOR |
An under-floor catalytic converter (2) inlet is attached to the exhaust manifold using fasteners and a gasket for sealing. A flex joint that is integral to the converter allows movement between the engine and the exhaust system. The converter outlet attaches to the intermediate pipe. See Fig 1.