Side Rail Tie Down Bracket: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - ATTACHING BOLTS |
| 2 - LEFT REAR SIDE RAIL SHIPPING TIE DOWN BRACKET |
| 3 - RIGHT REAR SIDE RAIL SHIPPING TIE DOWN BRACKET |
- Place rear side rail shipping tie down bracket into position the rear frame rail.
- Install the four bolts (1) attaching both left and right rear side rail shipping tie down bracket to rear frame rail. Tighten bolts to 68 N.m (50 ft. lbs.).
- Lower the vehicle from hoist.