Rear Emergency Tow Eye: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Tow Eye

Courtesy of DAIMLERCHRYSLER CORP.

1 - REAR TOW EYE BRACKET

2 - REAR TOW EYE

Place rear side rail tow hook into position on the rear frame rail.

Fig 2: Rear Side Rail Tow Hook

Courtesy of DAIMLERCHRYSLER CORP.

1 - ATTACHING BOLTS

2 - LEFT REAR SIDE RAIL SHIPPING TIE DOWN BRACKET

3 - REAR SIDE RAIL TOW HOOK

Install four bolts (1) attaching rear side rail tow hook (3) to rear frame rail. Tighten bolts to 68 N.m (50 ft. lbs.).
Lower the vehicle from hoist.