Rear Bumper Reinforcement: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - REAR BUMPER REINFORCEMENT |
| 2 - ATTACHING SCREW(S) |
| 3 - U-NUT(S) |
| 4 - REAR FASCIA FASTENER |
- Remove rear fascia (Refer to FRAME & BUMPERS/BUMPERS/REAR BUMPER - REMOVAL) .
- Remove 4 bolts (2) attaching reinforcement (1) to rear closure panel.
- Remove bumper reinforcement from vehicle.