LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Frames & Bumpers) >> Front Bumper Reinforcement >> Removal

Front Bumper Reinforcement: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Bumper Reinforcement
GC0021970Courtesy of DAIMLERCHRYSLER CORP.
1 - U-NUT(S)
2 - FRONT BUMPER FASCIA REINFORCEMENT
  1. Remove grille (Refer to BODY/EXTERIOR/GRILLE - REMOVAL) .
  2. Remove front fascia (Refer to FRAME & BUMPERS/BUMPERS/FRONT FASCIA - REMOVAL) .
  3. Remove bolts (1) attaching reinforcement to the rail assembly and remove reinforcement.
  4. Remove bumper reinforcement (2) from vehicle.
scientia non olet · About LEMON Manuals