Section 82 (Frames & Bumpers): Bumpers: Specifications: Torque
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Front bumper reinforcement to rail attaching bolt | 25 | - | 225 |
| Front bumper reinforcement to side of rail attaching bolt | 25 | - | 225 |
| Front fascia to fender bracket assembly attaching screws | 2 | - | 24 |
| Front fascia to upper crossmember bracket attaching screws | 5 | - | 43 |
| Splash shield to front fascia attaching screw | 2 | - | 24 |
| Lower front fascia bracket to lower radiator crossmember attaching screws | 6 | - | 50 |
| Front fascia to fender screws | 6 | - | 50 |
| Air dam to front fascia attaching screw | 2 | - | 24 |
| Air dam to lower crossmember bracket attaching screws | 2 | - | 24 |
| Grille to fender attaching screw | 2 | - | 24 |
| Grille to crossmember attaching screw | 2 | - | 24 |
| Rear bumper reinforcement attaching screw | 25 | - | 225 |
| Rear fascia to fender attaching screw | 2 | - | 24 |
| Splash shield to rear fascia attaching screw | 27 | 20 | - |
| Rear fascia stud plate to rear closure attaching nuts | 6 | - | 50 |