LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Rack & Pinion Power Steering System) >> Pump >> Hose-Supply >> Removal >> 2.2L Diesel

2.2L Diesel

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before proceeding, (Refer to STEERING - WARNING) .
  1. Disconnect the battery negative (-) terminal.
    Fig 1: Engine Top Cover Mounting
    GC0021734Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove the engine top appearance cover.
  3. Siphon as much fluid as possible from power steering fluid reservoir.
  4. Remove radiator fan. (Refer to COOLING/ENGINE/RADIATOR FAN - REMOVAL) .
    Fig 2: Hoses At Pump And Reservoir
    GC0021719Courtesy of DAIMLERCHRYSLER CORP.
    1 - FLUID RESERVOIR
    2 - SUPPLY HOSE
    3 - PRESSURE HOSE
  5. Remove the clamp securing the supply hose (2) to the power steering pump supply fitting, then remove the hose from the fitting.
  6. Remove the hose clamp securing supply hose (2) to the power steering fluid reservoir (1). Slide the hose off the end of the reservoir fitting and remove from vehicle.