LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Rack & Pinion Power Steering System) >> Column >> Steering Column Control Module >> Removal >> Removal >> Disassembly

Removal: Disassembly

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: LEFT - STALK RETAINING SCREW
GC0041408Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the left multi-function switch stalk retaining screw (2).
  2. Pull the left talk out of the SCCM.
    Fig 2: LEFT - STALK ELECTRICAL CONNECTOR
    GC0041407Courtesy of DAIMLERCHRYSLER CORP.
  3. Disconnect the left stalk electrical connector.
  4. Separate the left switch from the SCCM.
    Fig 3: RIGHT - STALK RETAINING SCREW
    GC0042964Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the one right multi-function switch retaining screw.
  6. Pull right switch out of SCCM.
    Fig 4: RIGHT - STALK ELECTRICAL CONNECTOR
    GC0042965Courtesy of DAIMLERCHRYSLER CORP.
  7. Disconnect the right switch electrical connector.
scientia non olet · About LEMON Manuals