LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Rack & Pinion Power Steering System) >> Column >> Shroud-Lower >> Removal

Section 81 (Rack & Pinion Power Steering System): Column: Shroud-Lower: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: STEERING COLUMN SHROUDS
GC0042953Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the column tilt at the full-downward position.
  2. Remove the two screws (4) attaching the upper shroud (1) to the lower shroud (2). After removing the screws, unclip the shrouds from each other by applying hand pressure along the seams where the shrouds connect on the sides, then remove the upper shroud.
  3. Push the tilt lever (5) downward.
  4. Remove the screw (3) attaching the lower shroud (2) to the steering column (6). Remove the lower shroud.
scientia non olet · About LEMON Manuals