Section 81 (Rack & Pinion Power Steering System): Column: Shroud-Lower: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Push the tilt lever (5) downward.
- Install the lower shroud (2) over the tilt lever and onto the column.
- Position the column tilt (5) at the full-upward position.
- Push the tilt lever (5) upward, locking it in place.
- Install the screw (3) attaching the lower shroud (2) to the steering column (6).
- Position the column tilt at the full-downward position and lock it in place.
- Install the upper shroud over the lower shroud, clipping the shrouds to one another.
- Install the two screws (4) attaching the upper shroud (1) to the lower shroud (2).