LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Rack & Pinion Power Steering System) >> Column >> Assembly >> Lock Cylinder Housing

Lock Cylinder Housing

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: LOCK CYLINDER HOUSING MOUNTING
GC0042960Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the lock cylinder housing in the RUN position.
  2. Align the lock cylinder housing (2) with the steering column.
  3. Install the two screws (1) fastening the lock cylinder housing (2) to the column. Tighten the screws to 12 N.m (110 in. lbs.).
scientia non olet · About LEMON Manuals