Compression Link: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)

Fig 1: Tire And Wheel Mounting
Courtesy of DAIMLERCHRYSLER CORP.
Remove wheel mounting nuts (3), then rear tire and wheel assembly (1).

Fig 2: Compression Link Mounting
Courtesy of DAIMLERCHRYSLER CORP.
Remove bolt and nut (2) mounting link (3) at knuckle.
Remove bolt and nut (1) mounting link (3) at crossmember.
Remove link (3).