Ball Joint - Lower: Description: AWD
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
The ball joint for the lower control arm is pressed into the lower control arm. The ball joint is a "sealed for life" component and cannot be maintenance lubricated. The ball joint is lubricated for life at the time of assembly. No attempt should be made to ever add any lubrication to these ball joints.
Neither the ball joint, nor the seal boot for the lower control arm can be serviced as a separate component. They entire arm must be replaced if either are damaged.