Rear Door Water Dam: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - REAR DOOR |
| 2 - REAR DOOR WATER DAM |
| 3 - REAR DOOR ARMREST TO INNER PANEL ATTACHING BRACKET |
- Remove door trim panel.
- Remove door speaker, if equipped.
- Remove door trim pull cup mount bracket.
- Disconnect clip attaching lock linkage to lock button bell-crank.
- Peel water dam away from adhesive around perimeter of inner door panel.