Rear Door Trim Panel: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - REAR DOOR |
| 2 - REAR DOOR TRIM PANEL |
| 3 - REAR DOOR REAR EDGE |
| 4 - REAR DOOR FLAG TRIM |
| 5 - REAR DOOR REMOTE HANDLE/BEZEL ASSEMBLY |
| 6 - REAR DOOR LATCH LINK AND SLEEVE |
- Release door latch (6) and open door.
- Lower window glass.
- Remove screw from inside arm rest pull cup.
- Remove screw from behind inside latch release handle.
- Remove fasteners from door trim panel (2).
- Disengage push in fasteners attaching trim to door panel around perimeter of trim panel.
- Disengage push-in metal spring clip attaching trim in sail flag area.
- Lift trim panel up off belt weatherstrip.
- Tilt top of trim panel away from door and disengage clip attaching latch rod to handle.
- Remove latch rod from handle.
- Remove trim panel (2) from door.