LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Interior & Exterior (1 Of 2)) >> Rear Door >> Rear Door Hinge >> Removal

Rear Door Hinge: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If both hinges on one door are to be replaced, remove and install one hinge completely prior to beginning the second hinge.
  1. With rear door closed apply tape to secure door into body.
  2. Open front door.
  3. Mark position of hinge on both the door end frame and lower B-pillar to ease installation.
  4. Remove B-pillar lower trim panel.
  5. Remove bolts attaching hinge to door end frame.
  6. Remove bolts attaching hinge to lower B-pillar.
  7. Remove door hinge from vehicle.
scientia non olet · About LEMON Manuals