Latch-Glove Box: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Latch-Glove Box

Courtesy of DAIMLERCHRYSLER CORP.

If removed, install the glove box lock cylinder into the glove box latch (Refer to BODY/INSTRUMENT PANEL/LOCK CYLINDER-GLOVE BOX - INSTALLATION) .
Position the glove box latch (2) to the glove box door (3).
Install the three screws (1) that secure the glove box latch to the glove box door. Tighten the screws to 2 N.m (17 in. lbs.).
Close the glove box bin.