LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Interior & Exterior (1 Of 2)) >> Instrument Panel >> End Cap-Instrument Panel >> Removal >> Passenger Side

Passenger Side

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box bin (Refer to BODY/INSTRUMENT PANEL/BIN-GLOVE BOX - REMOVAL) .
  2. Remove the two screws (1) that secure the passenger side instrument panel end cap (2) to the instrument panel (3).
  3. Using a trim stick C-4755 or equivalent, remove the passenger side instrument panel end cap from the instrument panel by releasing the snap retainers from the instrument panel.
  4. Remove the passenger side instrument panel end cap from the vehicle.
scientia non olet · About LEMON Manuals