LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Interior & Exterior (1 Of 2)) >> Instrument Panel >> End Cap-Instrument Panel >> Removal >> Driver Side

Driver Side

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column opening cover (Refer to BODY/INSTRUMENT PANEL/COVER-STEERING COLUMN OPENING - REMOVAL) .
  2. Remove the screw (1) that secures the driver side instrument panel end cap (2) to the instrument panel (3).
  3. Using a trim stick C-4755 or equivalent, remove the driver side instrument panel end cap from the instrument panel by releasing the snap retainers from the instrument panel.
  4. If equipped, disconnect the wire harness connector from the power mirror switch.
  5. Remove the driver side instrument panel end cap from the vehicle.
  6. If required, remove the power mirror switch from the driver side instrument panel end cap (Refer to ELECTRICAL/POWER MIRRORS/SWITCH-POWER MIRROR - REMOVAL) .
scientia non olet · About LEMON Manuals