LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Interior & Exterior (1 Of 2)) >> Instrument Panel >> Cover-Steering Column Opening >> Installation

Cover-Steering Column Opening: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the steering column opening reinforcement bracket to the instrument panel.
  2. Install the screws that secure the steering column opening reinforcement bracket to the instrument panel. Tighten the screws to 2.2 N.m (20 in. lbs.).
  3. Position the bottom of the steering column opening cover to the steering column opening reinforcement bracket and install the cover onto the retainer clips of the reinforcement bracket.
  4. Carefully raise the top of the steering column opening cover upward and engage the snap retainers to the instrument panel.
  5. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals