LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Interior & Exterior (1 Of 2)) >> Instrument Panel >> Cover-Instrument Panel Top >> Installation

Cover-Instrument Panel Top: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: I/P COVER
GC0043064Courtesy of DAIMLERCHRYSLER CORP.
NOTE: LHD model shown in illustration. RHD model similar.
  1. Position the instrument panel top cover (1) onto the instrument panel (2) and engage the retainers that secure the top cover to the front of the instrument panel.
  2. Engage the snap retainers that secure the instrument panel top cover to the top of the instrument panel.
  3. Install the left and right A-pillar trim (Refer to BODY/INTERIOR/TRIM-A-PILLAR - INSTALLATION) .
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals