Section 79 (Interior & Exterior (1 Of 2)): Hood: Rod-Prop: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
- Open and support the hood.
- Disengage the hood prop rod (1) from the bushing (2) located in the front fender (3) and remove the prop rod.
- If required, remove and discard the bushing and the retaining clip (4) from the fender.