Section 79 (Interior & Exterior (1 Of 2)): Hood: Bumper-Adjustment: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Install the hood adjustment bumper(s) (1) into the mounting hole(s) located in the top of the upper radiator support (2).
- Adjust the adjustment bumper(s) in or out of the upper radiator support as necessary to achieve proper hood alignment. The hood should fit flush across the top surfaces along fenders and have even gaps aligned to 4 mm (0.160 in.) to the adjacent body panels.