LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Interior & Exterior (1 Of 2)) >> Front Door >> Front Door Vertical Guide Bar >> Removal

Front Door Vertical Guide Bar: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove door trim panel and water dam.
  2. Remove door speaker, if equipped.
  3. Remove front lift guide.
  4. Remove bolt attaching top of front guide bar to inner door panel.
  5. Using a Snap-on® flare-nut socket (FRXM10) and a hex wrench, remove nut attaching bottom of guide bar to door panel while holding jack screws.
scientia non olet · About LEMON Manuals