LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Interior & Exterior (1 Of 2)) >> Exterior >> Grille-Upper >> Removal

Section 79 (Interior & Exterior (1 Of 2)): Exterior: Grille-Upper: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Grille-Removal & Installation
GC0043027Courtesy of DAIMLERCHRYSLER CORP.
  1. Open and support the hood.
  2. Remove the four screws (1) that secure the grille (4) to the nuts (2) located on the top of the fender and upper radiator support.
  3. Carefully pull the grille upward and outward to disengage the two retaining hooks (5) from the fender (3) and remove the grille.
  4. If equipped and required, remove the chrome strips (6) from the grille by using a small flat blade tool to release the retaining tabs.