Section 79 (Interior & Exterior (1 Of 2)): DECKLID/Hatch/Liftgate/Tailgate: Striker: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Open the decklid.NOTE: Place a reference mark along the outer edge of the striker to ensure it is reinstalled to its original position.
- Mark the position of the striker (1) on the decklid opening lower panel (3) to aid installation.
- Remove the two screws (2) that secure the striker to the lower panel and remove the striker.