Section 79 (Interior & Exterior (1 Of 2)): DECKLID/Hatch/Liftgate/Tailgate: Latch: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Open the decklid (5).
- Remove the decklid trim panel (Refer to BODY/DECKLID/PANEL-TRIM - REMOVAL) .
- Disengage the retainer clip that secures the lock cylinder link (1) to the latch (6) and disconnect the link.
- Remove the two bolts (7) that secure the latch to the decklid and remove the latch.