LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Interior & Exterior (1 Of 2)) >> DECKLID/Hatch/Liftgate/Tailgate >> DECKLID >> Removal

Section 79 (Interior & Exterior (1 Of 2)): DECKLID/Hatch/Liftgate/Tailgate: DECKLID: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Decklid Hinge
GC0022283Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the negative battery cable.
  2. Release the decklid latch and open the decklid (3).
  3. Remove the decklid trim panel (Refer to BODY/DECKLID/PANEL-TRIM - REMOVAL)  .
  4. Disconnect the decklid wire harness from the body wire harness.
  5. Support decklid with a suitable lifting device and disengage the clips that secure the gas prop rods (1) to the decklid. (Refer to BODY/DECKLID/PROP ROD-GAS - REMOVAL) .
  6. Remove the bolts that secure the decklid to the decklid hinges (2) and with assistance, carefully remove the liftgate the from vehicle.
scientia non olet · About LEMON Manuals