Convertible Top: Adjustments: Notes
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
No adjustments should be done to the internal folding top adjustment screws located on the main pivot bracket. These screws are manufacturer initial settings only.
Adjustment of the power hydraulic folding convertible top should be performed if the top exhibits any of the following concerns:
- Pull-down and latching efforts too high
- Wrinkles in canopy
- Header "slap" (when top is raised, prior to pull down)
- Dowel pin misalignment