LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (HVAC Systems (Service Information)) >> Plumbing >> Tube-Condensation Drain >> Installation

Tube-Condensation Drain: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Condensation Water Drain Tube - Typical
GC0020940Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the condensate drain tube (3) onto the HVAC housing drain (4) located on the passenger side of the dash panel (1) in the engine compartment.
  2. Engage the retaining clamp (2) that secures the condensate drain tube onto the HVAC housing drain.
  3. Lower the vehicle.