LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (HVAC Systems (Service Information)) >> Distribution >> Duct-Defroster >> Installation

Section 78 (HVAC Systems (Service Information)): Distribution: Duct-Defroster: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Duct - Defroster
GC0043071Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the defroster duct (4) to the back of the instrument panel.
  2. Install the four screws (2) that secure the defroster duct to the instrument panel. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Connect the right demister duct (1) and the left demister duct (3) to the defroster duct.
  4. Install the instrument panel assembly (Refer to BODY/INSTRUMENT PANEL/ASSEMBLY-INSTRUMENT PANEL - INSTALLATION) .