Section 76 (2.4L DOHC Engine): Strut-Torque: Installation: Upper

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Mounting - Right Side

Courtesy of DAIMLERCHRYSLER CORP.

1 - BOLT

2 - RIGHT FENDER

3 - UPPER TORQUE STRUT BRACKET

4 - NUT

5 - BOLT

6 - UPPER TORQUE STRUT

7 - BOLT

8 - LOWER TORQUE STRUT BRACKET

9 - BOLT

10 - LOWER TORQUE STRUT

11 - BOLT

12 - RIGHT ENGINE MOUNT

Position the upper torque strut (6) into mounting location. See Fig 1.
Move torque strut aside (towards right fender) and install timing belt front upper cover (if A/C equipped).
Install the torque strut mounting bolts and perform the torque strut adjustment procedure (Refer to ENGINE/ENGINE MOUNTING/TORQUE STRUT - ADJUSTMENTS) .