Sensor/Switch-Oil Pressure: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Oil Pressure Switch

Courtesy of DAIMLERCHRYSLER CORP.

1 - EXHAUST MANIFOLD HEAT SHEILD

2 -OIL FILTER

3 - OIL PRESSURE SWITCH

Raise vehicle.
Position oil collecting container under pressure switch (3) location.
Disconnect oil pressure switch electrical connector and remove switch (3). See Fig 1.