Section 76 (2.4L DOHC Engine): Pump-Oil: Assembly
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - O-RING |
| 2 - SEAL |
| 3 - INNER ROTOR |
| 4 - OIL PUMP COVER |
| 5 - FASTENER |
| 6 - OUTER ROTOR |
| 7 - OIL PUMP BODY |
- Assemble pump, using new parts as required. Install the inner rotor (3) with chamfer facing the cast iron oil pump cover (4).
- Prime oil pump before installation by filling rotor cavity with engine oil.
- Install cover and tighten fasteners (5) to 13 N.m (118 in. lbs.). See Fig 1.