Jet-Oil 2.4L Turbo: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - FASTENER - 12 N.m (105 in. lbs.) |
| 2 - OIL JET |
| 3 - ENGINE BLOCK |
| 4 - CYLINDER WALL |
- Remove crankshaft (Refer to ENGINE/ENGINE BLOCK/CRANKSHAFT - REMOVAL) .
- Remove oil jet fastener (1). See Fig 1.CAUTION: Do Not Pull on Oil Jet Tube
- Using pliers or other similar tool, pull oil jet (2) from engine block (3).