Housing-Air Cleaner: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - CLEAN AIR HOSE |
| 2 - AIR CLEANER HOUSING |
| 3 - FRESH AIR INLET DUCT |
| 4 - PDC MOUNTING BRACKET |
- Install inlet duct (3) to the air cleaner housing (2).
- Make sure the rubber grommets, for the air cleaner housing lower pins, are in place when reinstalling the air cleaner housing (2). The rubber grommets mount to the PDC bracket (4).
- Push air cleaner housing (2) down while aligning pins into the grommets.
- Connect the throttle body air inlet hose/clean (1) air hose to the air cleaner housing (2).