Section 76 (2.4L DOHC Engine): Damper-Vibration: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crankshaft Damper-Removal

Courtesy of DAIMLERCHRYSLER CORP.

1 - PULLER 1026

2 - CRANKSHAFT DAMPER REMOVAL INSERT 6827A

Remove accessory drive belts (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL) .
Remove lower splash shield.
Remove crankshaft damper bolt.
Remove damper by using Puller 1026 (1) and Crankshaft Damper Removal Insert 6827A (2). See Fig 1.