LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (2.4L DOHC Engine) >> Lines-Oil Cooler >> Removal

Lines-Oil Cooler: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Cooler and Lines
GC0021261Courtesy of DAIMLERCHRYSLER CORP.
1 - COOLANT TUBES
2 - COOLANT HOSES
3 - OIL FILTER
4 - OIL COOLER
  1. Raise vehicle on hoist.
  2. Drain cooling system, (Refer to DRAINING COOLING SYSTEM - 2.0/2.4L ).
  3. Disconnect oil cooler coolant hoses (1,2). See Fig 1.
  4. Remove oil filter (3).
    Fig 2: Oil Cooler Connector Bolt
    GC0021262Courtesy of DAIMLERCHRYSLER CORP.
    1 - OIL COOLER
    2 - CONNECTOR BOLT
  5. Remove oil cooler connector bolt (2). See Fig 2.
  6. Remove oil cooler (1).
scientia non olet · About LEMON Manuals