Seal-Spark Plug Tube: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Spark Plug Tube Seal Installation

Courtesy of DAIMLERCHRYSLER CORP.

1 - SPECIAL TOOL MD-998306

2 - SPARK PLUG TUBE SEAL

Clean all sealing surfaces.
NOTE: Position seal with the concave side facing the installation tool. See Fig 1.
Install seals (2) using Special Tool MB-998306 (1). See Fig 1. Only hand pressure on tool is needed to install new seals.
Install the cylinder head cover (Refer to ENGINE/CYLINDER HEAD/CYLINDER HEAD COVER - INSTALLATION) .