LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (1.6L SOHC Engine) >> Rings-Piston >> Removal

Section 75 (1.6L SOHC Engine): Rings-Piston: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Piston Rings-Removing and Installing - Typical
GC0021532Courtesy of DAIMLERCHRYSLER CORP.
  1. Using a suitable ring expander, remove upper and intermediate piston rings. See Fig 1.
  2. Remove the upper oil ring side rail, lower oil ring side rail and then oil ring expander from piston.
  3. Clean ring grooves of any carbon deposits.
scientia non olet · About LEMON Manuals