Section 75 (1.6L SOHC Engine): Mount-Left: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - PDC |
| 2 - PDC BRACKET BOLTS |
| 3 - BATTERY TRAY BOLT |
- Remove air cleaner assembly.
- Disconnect negative cable from battery.
- Remove bolts attaching the power distribution center (PDC) bracket (2) to left mount and battery tray (3). See Fig 1.
1 - BOLT 2 - LEFT MOUNT 3 - TRANSAXLE 4 - BOLT - Support transaxle (3) with a suitable jack.
- Remove mount to transaxle bolts (1). See Fig 2.
- Remove left mount (2) bracket to body frame rail fasteners. See Fig 2.
- Remove mount (2).