Section 75 (1.6L SOHC Engine): Mount-Left: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Left Mount

Courtesy of DAIMLERCHRYSLER CORP.

1 - BOLT

2 - LEFT MOUNT

3 - TRANSAXLE

4 - BOLT

Install engine mount (2) bracket to body frame rail and tighten fasteners to 28 N.m (250 in. lbs.). See Fig 1.
Position engine/transaxle for installation of mount to transaxle bolts (1). Install and tighten bolts to 68 N.m (50 ft. lbs.). See Fig 1.

Remove jack from under transaxle (3).

Fig 2: PDC Bracket Attaching Bolts

Courtesy of DAIMLERCHRYSLER CORP.

1 - PDC

2 - PDC BRACKET BOLTS

3 - BATTERY TRAY BOLT

Install bolts (2) attaching the power distribution center (PDC) bracket to left mount and battery tray. See Fig 2.
Connect negative cable to battery.
Install air cleaner assembly.