LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (1.6L SOHC Engine) >> Housing-Air Cleaner >> Removal

Housing-Air Cleaner: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Air Cleaner Housing Cover & Element
GC0021465Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the inlet air temperature sensor.
  2. Remove the inlet tube to throttle body.
  3. Unsnap the 2 clips holding the air cleaner housing cover (1).
  4. Lift the air cleaner housing cover (1) up.
  5. Remove the air cleaner element (2).
    Fig 2: Air Cleaner Housing
    GC0021466Courtesy of DAIMLERCHRYSLER CORP.
  6. Pull air cleaner housing (1) straight up and off of the 2 locating pins.
scientia non olet · About LEMON Manuals