LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (1.6L SOHC Engine) >> Chain And Sprockets-Timing >> Removal >> Crankshaft Sprocket

Crankshaft Sprocket

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Crankshaft Sprocket Removal
GC0021566Courtesy of DAIMLERCHRYSLER CORP.
1 - PULLER 5048-6
2 - PULLER ADAPTER 8539
3 - PULLER 5048-1
  1. Remove timing chain (Refer to ENGINE/VALVE TIMING/TIMING CHAIN - REMOVAL)  .
  2. Remove crankshaft sprocket by first installing crankshaft vibration damper bolt. Apply grease or equivalent to damper bolt head and position Puller 5048-1 (3), 5048-6 (1), and Puller Adapter 8539 (2) on sprocket and crankshaft nose. See Fig 1.
  3. Remove sprocket using care not to rotate the crankshaft.
scientia non olet · About LEMON Manuals